Cambium PMP 450i 3 GHz Subscriber Module w/ Integrated 19 dBi Dual Slant Antenna

Cambium Networks 3 GHz connectorized access point is part of the industry leading PMP 450i product line. It is the most scalable industrial-grade wireless broadband solution available. This model has an integrated dual slant 19 dBi antenna.

Product Features:

• Ultra-Wide Band: Radios support the entire band, advanced radio design improves transmit power and increases receive sensitivity.
• Rugged Metal Enclosure: Designed to meet IP-66 and IP-67 standards to withstand harsh environments.
• Dynamic Interference Filtering: Provides industry leading noise isolation for improved performance.
• Updated FPGA and SoC architecture triples the processing power compared to PMP 450.
• Multi-function AUX Power: Allows for greater flexibility for deployment by adding a camera or other PoE directly.

• Channel Spacing: Configurable on 2.5 MHz increments, 3 GHz customizable to 50 KHz
• Frequency Range: 3300 to 3900 MHz
• Channel Width: 5 / 7 / 10 / 15 / 20 / 30 MHz
• MAC (Media Access Control) Layer: Cambium Networks proprietary
• Physical Layer: 2x2 MiMO OFDM
• Ethernet Interface: 100/1000BaseT, full duplex, rate auto negotiated (802.3 compliant)
• Protocols Used: IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP
• Network Management: HTTP, HTTPS, Telnet, FTP, SNMP v3
• VLAN: 802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID
• ARQ: Yes
• Maximum Deployment Range: Up to 40 miles (64 km)
• Latency: 3 - 5 ms, typical
• GPS Synchronization: Yes, via Autosync (CMM3, CMM4)
• Quality of Service: Diffserve QoS
• Antenna Beam Width: 10° azimuth for integrated antenna
• Antenna Gain: 19 dBi dual slant integrated antenna
• Transmit Power Range: 40 dB dynamic range (to EIRP limit by region)(1 dB step)
• Maximum Transmit Power: 25 dBm combined output
• Surge Suppression: EN6100-4-5:1.2us, 500 V voltage waveform
• Mean Time Between Failure: > 40 Years
• Environmental: IP66, IP67
• Temperature / Humidity: -40 to 60°C (-40 to 140°F), 0 to 95% non-condensing
• Weight: Approx. 2.5 kg (5.5 lbs)
• Wind Survival: 200 km/h (124 mph)
• Dimensions: 31.0 x 31.0 x 6.4 cm (12 x 12 x 2.5 ")
• Power Consumption: 15 W typical, 25 W max, 55 W max with Aux port PoE out enabled
• Input Voltage: 48 - 59 VDC, 802.3at compliant
• Mounting: Wall or Pole mountable
• Encryption: 56-bit DES, FIPS-197 128-bit AES
• CE: EN 302 326-2 v1.2.2 / EN 302 326-3 v1.3.1