Meraki MR30H 802.11ac 1.3 Gbps dual-band 4-Port RJ45 Wave 2 MU-MIMO Switch Access Point

The Cisco Meraki MR30H is a quad-radio, cloud-managed 2x2:2 802.11ac Wave 2 wall switch access point with MU-MIMO support. Designed for next-generation deployments in hotel rooms, university residences, and other multi-dwelling units, the MR30H provides performance, enterprise-grade security, and simple management.

The MR30H provides a maximum 1.3 Gbps aggregate frame rate with concurrent 2.4 GHz and 5 GHz radios. A dedicated third radio provides real-time WIDS/WIPS with automated RF optimization. Four ethernet ports on the wall switch allow easy connectivity of external wired devices. An integrated Bluetooth Low Energy (BLE) radio delivers beacon and scanning capabilities.

The combination of cloud management, 802.11ac Wave 2, full-time RF environment scanning, a wall switch, and integrated Bluetooth technology delivers the throughput, reliability, convenience and flexibility required by demanding multi-dwelling use cases.

The MR30H is managed through the Meraki cloud, with an intuitive browser-based interface that enables rapid deployment without training or certifications. Since the MR30H is self-configuring and managed over the web, it can even be deployed at a remote location without on-site IT staff.

The MR30H is monitored 24x7 via the Meraki cloud, which delivers real-time alerts if the network encounters problems. Remote diagnostics tools enable real-time troubleshooting over the web, meaning multi-site, distributed networks can be managed remotely.

The MR30H's firmware is always kept up to date from the cloud. New features, bug fixes, and enhancements are delivered seamlessly over the web, meaning no manual software updates to download or missing security patches to worry about.

A 5 GHz 2x2:2 radio supporting 80 MHz channel widths and a 2.4 GHz 2x2:2 radio supporting 40 MHz channel widths offer a combined dual-radio aggregate frame rate of 1.3 Gbps, with up to 866 Mbps in the 5 GHz band thanks to 802.11ac Wave 2 and 400 Mbps in the 2.4 GHz band.

With support for the 802.11ac Wave 2 standard, the MR30H offers MU-MIMO for more efficient transmission to multiple clients. Especially suited for environments with numerous mobile devices, MU-MIMO enables multiple clients to receive data simultaneously. This increases the total network performance and the improves the end user experience.

The MR30H's sophisticated, dedicated dual-band third radio scans the environment continuously, characterizing RF interference and containing wireless threats like rogue access points. No more need to choose between wireless security, advanced RF analysis, and serving client data: a dedicated third radio means that all three occur in real-time, without any impact to client traffic or AP throughput.

PoE Injector not Included, purchase here: MA-INJ-4-US

• Aggregate data rate of up to 1.3 Gbps
• 2x2 MU-MIMO (Multi User Multiple Input Multiple Output) 802.11ac Wave 2
• Integrated Bluetooth BLE radio
• Layer 7 Traffic Shaping
• RF Optimization
• Antenna: Integrated omni-directional antennas (3.7 dBi gain at 2.4 GHz, 4.8 dBi gain at 5 GHz)
• Interfaces:
  (1) 10/100/1000 BASE-T Ethernet (RJ45) input
  (1) Gigabit Ethernet (RJ45) with 802.3af Power over Ethernet output
  (3) Gigabit Ethernet (RJ45) out
• Security:
  802.1X integration
  Air Marshal: real-time WIPS with forensics
  Stateful Layer 3-7 firewall
  Identity-based group policies
  Built-in antivirus scan (NAC)

• Radios:
  2.4 GHz 802.11b/g/n client access radio
  5 GHz 802.11a/n/ac client access radio
  2.4 GHz & 5 GHz WIDS/WIPS, spectrum analysis, and location analytics radio
  2.4 GHz Bluetooth Low Energy (BLE) radio with beacon and BLE scanning support
  Concurrent operations of all four radios
• 802.11ac and 802.11n Capabilities:
  2 x 2 multiple input, multiple output (MIMO) with two spatial streams
  SU-MIMO and MU-MIMO support
  Maximal ratio combining (MRC) & Beamforming
  20 and 40 MHz channels (802.11n), 20, 40, and 80 MHz channels (802.11ac)
  Up to 256 QAM on both 2.4 GHz and 5 GHz bands
  Packet aggregation
• Power:
  Power over Ethernet: 37 - 57 V (802.3at compatible)
  Power consumption: 25W max (802.3at)
  PoE Injector not Included, purchase here: MA-INJ-4-US
• Mounting:
  Mounting hardware included for US, UK, EU, AU & Asia single gang wall jacks
• Physical Security:
  Two security screw options (included)
  Concealed mount plate
• Environment:
  Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
  Humidity: 5 to 95% non-condensing