Cambium PTP 670 4.9 - 6.05GHz Radio w/ 23dBi Panel Antenna + AC/DC Power Injector

The Cambium Networks C050067H004B is a PTP 670 radio with an integrated 23dBi panel antenna and an AC/DC power injector, great for emergency deployments. HCMP is the standout feature of this line of products, as it allows for fast deployment with little planning.

Product Features:

• Frequency band: 4.9 to 6.05GHz
• Maximum of 450MB/s and maximum range of 155 miles in a PTP topology
• Up to 8 remote notes and maximum of 25 mile range in a HCMP topology
• FIPS-197 128/256-bit AES encryption
• IEEE 1588v2 and Synchronous Ethernet (SyncE)

• RF Bands: Wide-band operation 4.9 to 6.05GHz (allowable frequencies and bands are dictated by individual country regulations)
• Channel Sizes: 5/10/15/20/30/40/45MHz channels, depends on individual country regulations
• Spectral Efficiency: 10bps/Hz maximum
• Channel Selection: By Dynamic Spectrum Optimization or manual intervention. Automatic selection on start-up and continual self-optimization to avoid interference
• Maximum Transit Power: Up to 27dBm
• System Gain: Up to 164dB with Integrated Antenna
• Modulation / Error Correction: Fast Preemtptive Adaptive Modulation featuring 13 modulation / FEC coding levels ranging from BPSK to 256 QAM dual-payload MIMO
• Duplex Scheme: Time Division Duplex (TDD), Adaptive or fixed transmit/receive duty cycles, Split frequency operation allows separate transmit and receive frequencies where allowed by regulation, Optional TDD synchronization using PTP-SYNCH Module
• Antenna: Integrated 23dBi Flat Panel
• Range: Up to 155 miles (250km)
• Security: FIPS-197 compliant 128/256-bit AES Encryption (optional) HTTPS and SNMPv3, Identity-based user accounts Configurable password rules, User authentication and RADIUS support, Event logging and management; optional logging via syslog, Disaster recovery and vulnerability management
• Ethernet Protocol: IEEE 802.3
• Latency: 1-3 milliseconds one direction
• QoS: Extensive QoS supporting up to 8 Queues
• Packet Classification: Layer 2 and Layer 3 IEEE 802.1p, MPLS, Ethernet priority
• Packet Performance: Line rate (>850k packets per second)
• Timing Transport: Synchronous Ethernet; IEEE 1588v2
• Frame Support: PTP Mode: Jumbo frame up to 9600 bytes, HCMP Mode: 2000 bytes per frame
• Flexible I/O: (2) Gigabit Ethernet copper ports: Gigabit Port 1: Data + PoE power input, Gigabit Port 2: 802.3at PoE output port, (1) SFP port: Single-mode fiber, multi-mode fiber, or copper Gigabit Ethernet options available
• T1/E1 TDM Support: (8) T1/E1 TDM (Network Indoor Unit (NIDU)), G.823-compliant timing, DC power input (compatible with AC+DC Power Injector output)
• Network Management: In-band and out-of-band management (OOBM)
• System Management: IPv6/IPv4 dual-stack management support, Web access via browser using HTTP or HTTPs/TLS3 SNMP v1, v2c and v3, MIB-II & proprietary PTP MIB, Online spectrum analyzer (no impact on payload traffic or network operation)
• Installation: Built-in audio and graphical assistance for link optimization
• Remote Modules Master: Up to 8 Nodes
• Channel Bandwidth: 20 and 40MHz
• Spectral Efficiency: 8bps/Hz Max
• Line Rate Packet per Second: 850K pps
• Latency in HCMP Mode: 2 to 4ms one way (typically)
• Dimensions: 305 x 305 x 81mm (12 x 12 x 3.2")
• Weight: 4.1kg (8.95lbs), including bracket
• Operating Temperature: -40 to 140°F (-40 to 60°C), including solar radiation
• Dust-Water Intrusion Protection: IP66 and IP67
• Wind Speed Survival: 200mph (322kph)
• Power Supply: -40 to 140°F (-40 to 60°C) 70W, 90-240VAC, 50/60Hz
• Power Consumption: 30W maximum (up to 70W with 802.3at device on auxilliary products)
• Protection and Safety: UL60950-1, IEC60950-1, EN60950-1, CSA-C22.2 No. 60950-1, CB approval for Global
• Radio: 4.9GHz: FCC Part 90Y, RSS-111, 5.x GHz: FCC Part 15, sub-parts 15C and 15E; RSS 210 Issue 8;, EN 302 502; EN 301 893 Eire ComReg 02/71R1, UK Approval to IR2007, Europe - EN301 489-1 and -4