IgniteNet MetroLinq 60 GHz Terragraph Distribution Node [MLTG-360-1-FCC]
MLTG-360-1-FCC
by IgniteNet
Sold out
Original price
$1,856.00
-
Original price
$1,856.00
Original price
$1,856.00
$1,856.00
$1,856.00
-
$1,856.00
Current price
$1,856.00
The IgniteNet MLTG-360-1 is a Terragraph certified distribution node (DN). MLTG-360-1 has 1 radio, supporting 90° coverage. The MLTG-360-1 is equipped with a 256-element beamforming phased array antenna, supporting up to 1.8 Gbps bi-directional throughput. In addition, MLTG-360-1 supports advanced mesh solution to establish a robust wireless network. Resilient mesh can be easily constructed between multiple MLTG-360-1 to construct the wireless network with high availability.
MLTG-360-1 provides fiber-like connectivity at a lower cost than fiber which is ideal for fixed wireless access, backhaul of Wi-Fi, or cellular networks.
Product Features- Support channel 1 to channel 4 (57-66GHz)
- Up to 1.8 Gbps throughput
- Beam forming technology with phased array antenna for easy alignment
- Support TDMA-MAC for dynamic bandwidth allocation
- Support Over-the-Air (OTA) Security with AES128 encryption
- Mesh network with IPv6 routing
- Support IEEE 1588v2 timing synchronization
- Support QoS with 4 service classes
- Support VLAN tagging and QinQ
- Less than 800 microseconds latency per hop for a point-to-point link
- Self-recovery & optimization
Physical
- 60 GHz Radio
(1) antenna tile
64 antenna elements
90 degrees azimuth scan range: -45° to 45°
50 degrees elevation scan range: -25° to 25° - Interfaces
(1) Gigabit Ethernet Port (PoE IN)
(1) 10 Gigabit SFP+ port
(4) Gigabit Ethernet Port (PoE OUT)
(1) 60 GHz Radio - Environmental Conditions
Operating Temperature: -20°C (-4°F) to 55°C (131°F)
IP66 Rating - Power
Passive PoE (Injector Optional)
42.5V~59V DC terminal block - Certifications: FCC/ CE
- Range:
Up to 200m for MCS12
Up to 250m for MCS9 - RF Performance (TX): EIRP 44dBm for each radio
- RF Performance (RX):
-88 dBm @ MCS9
-78 dBm @ MCS12
(1) MLTG-360-1 Distribution Node
(1) Mounting Hardware
If not using DC Power, the ICC-POE-90W is required.