Meraki Multigigabit 802.3at 30W Power Over Ethernet Injector (US version)

Meraki Multigigabit 802.3at 30W Power Over Ethernet Injector - The Meraki multigigabit PoE injector allows delivery of both data and power to a Meraki access point over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage at a much lower installation cost. The Meraki Multigigabit 802.3at PoE Injector provides fully-compliant 802.3at detection, with disconnect, short-circuit and overload protection. This ensures that only 802.3at and 802.3af devices receive power and non-compliant devices are not accidentally damaged. 

• Reduces cost and simplifies installations by eliminating the need to provide separate power line
• Increases installation flexibility by powering devices from up to 100 meters away
• Fully IEEE 802.3at standard compliant
• Supports 10/100/1000BASE-T and 10 Gbps Multigigabit Ethernet
• Power, load detection and fault diagnostics LEDs

• Input voltage: 100 to 240 VAC
• Maximal input current: 1.5A
• AC input frequency: 50-60 Hz
• Output voltage: 55 VDC
• Maximum output power: 30W
• Powered device can be up to 100m away from power injector

• Compatible with Ethernet 10/100/1000 Mbps & 10 Gbps Multigigabit Ethernet

• Operating temperature: -10 to 45 °C (14 to 113°F)
• Storage temperature: -40 to 70 °C (-40 to 158°F)
• Operating humidity: Maximum 90%

• 166 mm x 87.9 mm x 43 mm (6.53” x 3.46” x 1.68”)
• Weight: 410 g (0.91lb)

• Complies with IEEE 802.3at standard
• Backward compatibility with 802.3af devices

(1) Power Cord