Primus Cable 900um SC/APC Single Mode Fiber Connector 6-Pack

The Primus Cable FASTConnect connectors are compatible with 250um and 900um optical fibers, as well as 900um, 2mm and 3mm cordage. All primary fiber types are supported, and each connector is color coded per industry-standard requirements to aide in identification during and after installation. A factory-installed wedge clip (included with each connector) is removed and discarded upon completion of the termination. Incorporated into this device is an innovative, translucent wedge enabling the use of a common VFL to provide a "pass/fail" signal once physical contact is achieved.

• Premise environments
• Connections at the desk for LAN environments
• Patch panels
• Direct equipment termination
• Fiber to the Subscriber (FTTx) applications
• Repair and replacement requirements
• Equipment test leads

• Pre-stubbed, APC factory-polished ferrule
• No epoxy required
• Precision mechanical alignment insures low loss
• Fiber can be reseated
• 900um boot provided with each connector. 2mm and 3mm boots are also available separately.
• VFI can be used to confirm fiber is installed properly
• Meets TIA/EIA 568A performance requirements
• Meets TIA/EIA 604 (focis) connector interface requirements

• Insertion Loss (Average): 0.2 dB
• Insertion Loss (Maximum): 0.5 dB
• Return Loss at Room Temperature (Average): -55 dB
• Return Loss at Room Temperature (Maximum): -45 dB
• Operating Temperature: -40°C to +75°C