Tycon Solar 600W Battery Charger 58.8V 10A w/US Power Cord

Tycon Solar 600W Battery Charger, TP-BC48-600, is a battery charger that provides up to 600W of total charging power. The Tycon battery charger is compatible with GEL/AGM type sealed lead acid batteries. The charger has various protections for reverse current, short-circuit, over-load, over-voltage, and over-current. There is an LED which indicates charging (Red) or battery full (Green). The unit comes with a removeable AC cord with a North American Plug. The units are can work from 90VAC to 240VAC (selectable via switch). Features • Total Power Available (for Load and Battery charging): 600W • Nominal Battery Voltage: 48VDC • Battery Charge Max Current: 10A • Battery Charger Voltag:e 58.8V • Battery Float Voltage: 55.2V • Efficiency: >88% • DC Output Cable: 2 Wire 14AWG ; 1.2m (48”) long cable Brown = V+, Blue = VAC • Input Connector IEC C14 • AC Power Cord: IEC C13 to Nema 5-15P, 1.2m (48") • AC Power Input: 120VAC / 240VAC , 50/60Hz • Hi-Pot Test: 1500VAC / 10mA / 1min • Insulation Resistance: >10MOhm, 500VDC • Operating Temperature: -10°C to +40°C (14°F to +104°F) • Operating Humidity (RH): 5% to 90% (non condensing) • Storage Temperature: -40°C to +70°C (-40°F to +158°F) • Storage Humidity: 5% to 95% (non-condensing) • Standards Compliance: CE, EN60335-1:2002 and EN60335-2-29:2002 • MTBF (Mean Time Between Failure): >50,000 hrs • Dimensions: (LxWxH) 216 x 120 x 76mm (8.5 x 4.75 x 3”) • Weight: 1.95kg (4.3lb) • Warranty: 2 Years Datasheet TP-BC48-600