Tycon Power POE SWITCH GIGE 8X 802.3BT 2XSFP MGMT DIN

The Tycon Power TP-SW8GAT/24-SFP Power over Ethernet (PoE) 10 port Gigabit switch offered by Tycon is a fully automatic high speed Layer 2+ Ethernet manageable switch. With user configurable PoE ports to provide 802.3AT or Passive 24V PoE enabling the powering of different devices from the same PoE Switch. It’s two 1Gb SFP fiber ports accept standard single mode or multimode fiber transceivers.

With L2+ features, the switches provide better manageability, security, QOS features and performance. VLAN, Port Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP Source Guard, Access Control Lists, PoE management are just some of the features available with this Industrial PoE Switch. Spanning Tree, Jumbo Frames, Ring Topology are also supported. The switches feature two separate power inputs for primary and backup power. They require a 37VDC to 57VDC input on the wire terminal connector which is capable of accepting up to 12AWG wire. The units are compatible with Category 5 or higher Ethernet cables with network distances up to 100m. The optical range for fiber ports is up to 120Km. The RJ45 connectors are shielded and grounded to the case. The units have surge protection on all ports and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.

Product Features:

• 10/100/1000 Gigabit Compatible Ethernet and 1G Fiber
• Ultimate Flexibility for Broadband and Security Integrators:
• Manageable via Console Port or IP
• Surge Protected Voltage and Ethernet Inputs, Metal Shell
• Integrated DIN Rail Mount and Wall Mounts
• Industrial Strength -40°F to 167°F (Operating Temperature)

Product Specifications:

• Ports 1-8:Configurable as 802.3af/at or 24V Passive PoE, 30W
• Ports 9-10:SFP Fiber Transceivers
• Ethernet Transmission Speed: 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
• Fiber Transceiver Compatibility: 1GMulti Mode or Single Mode
• Connections: Shielded RJ45, Shielded SFP/LC, Grounded to Case
• Power Input: Vin 37VDC to 57VDC on Dual Input Wire Terminal (Max wire size 12AWG)
• Management Methods: WEB, CLI, TELNET, SSH, SNMP
• Port Management: PoE enable/disable, PoE Mode control, Soft Re-boot PoE Port, Total PoE Power budget control, PoE Port priority, PoE port power limitation, PD Classification Detect, PD alive check, PoE scheduling
• Link Aggregation: Static/Manual Aggregation, LACP Dynamic Convergence, Algorithm based on source/destination IP or MAC
• MAC Management: Add/Delete, MAC Address learning limit, Dynamic Aging Time Setting
• Switching Capacity: 20 Gbps
• Packet Forwarding Rate: 14.88Mpps @ 64 Bytes
• Package Cache: 4.1M
• RAM / Flash: 1 Gb / 128MB
• Network Protocols and Standards Summary: IEEE 802.3i 10BASET, 802.3u 100BASET, 802.3z 1000BASET, 802.3x Flow Control, 802.3ab Gigabit Media Independent Interface (GMII), 802.1q VLANs,802.1p (QOS), 802.3ad Link Aggregation Control Protocol (LACP), 802.3af /at (PoE), IEEE G.8032 Ethernet ring protection (<20ms), (STP) 802.1d,(RSTP) 802.1w, (MSTP) 802.1s
• Operating Temp: -40°F to 167°F (-40°C to +75°C)
• Storage Temperature: -40°F to +185°F (-40°C to +85°C)

Product Includes:

(1) Tycon Power TP-SW8GAT/24-SFP PoE Switch

(1) User Manual