IgniteNet MetroLinq Terragraph Distribution Node, 2 Radios, 180 Degrees [MLTG-360-2P-FCC]

The IgniteNet MLTG-360-2P is a Terragraph certified distribution node (DN). MLTG-360-2P has 2 radios, supporting 180° coverage. Each radio of MLTG-360-2P equipped with a 256-element beamforming phased array antenna, supporting up to 1.8 Gbps bi-directional throughput. In addition, MLTG-360-2P supports advanced mesh solution to establish a robust wireless network. Resilient mesh can be easily constructed between multiple MLTG-360-2P to construct the wireless network with high availability.

MLTG-360-2P provides fiber-like connectivity at a lower cost than fiber which is ideal for fixed wireless access, backhaul of Wi-Fi, or cellular networks.

Product Features

• Support channel 1 to channel 4 (57-66GHz)
• Up to 1.8 Gbps throughput in both direction for each radio
• Beam forming technology with phased array antenna for easy alignment
• Support TDMA-MAC for dynamic bandwidth allocation
• Support Over-the-Air (OTA) Security with AES128 encryption
• Mesh network with IPv6 routing
• Support IEEE 1588v2 timing synchronization
• Support QoS with 4 service classes
• Support VLAN tagging and QinQ
• Less than 800 microseconds latency per hop for a point-to-point link
• Self-recovery & optimization

Product Specifications
Physical

• 60 GHz Radio
  (2) antenna tiles per radio
  64 antenna elements for each antenna tile
  90 degrees azimuth scan range: -45° to 45°
  50 degrees elevation scan range: -25° to 25°
• Interfaces
  (1) Gigabit Ethernet Port (PoE IN)
  (1) 10 Gigabit SFP+ port
  (4) Gigabit Ethernet Port (PoE OUT)
  (2) 60 GHz Radio
• Environmental Conditions
  Operating Temperature: -20°C (-4°F) to 55°C (131°F)
  IP66 Rating
• Power
  Passive PoE (Injector Optional)
  42.5V~59V DC terminal block
• Certifications: FCC/ CE

Performance

• Range:
  Up to 200m for MCS12
  Up to 250m for MCS9
• RF Performance (TX): EIRP 44dBm for each radio
• RF Performance (RX):
  -88 dBm @ MCS9
  -78 dBm @ MCS12

Product Includes

• (1) MLTG-360-2P Distribution Node
• (1) Mounting Hardware

If not using DC Power, the ICC-POE-90W is required.